Irrigation flowmeter for farmland

『Irrigation flowmeter for farmland』Related information(clamp on meter|electromagnetic meter|venturi meterrotameter|orifice meter|ultrasonic flow meter|mass flow meter|coriolis mass flow meter|coriolis flow meter|magnetic flow meter|magmeter flow meter|magflow flow meter|mag meter flow meter|electromagnetic flow meter|vortex flow meter|turbine flow meter|thermal mass flow meter|thermal flow meter|rotameter flow meter)

1. Working principle of Doppler ultrasonic flowmeter

The working principle of Doppler ultrasonic flowmeter is to use the principle of Doppler effect to measure the flow velocity of liquid or gas. The Doppler effect refers to the frequency change of waves when the source and receiver move relative to each other. The Doppler ultrasonic flowmeter is based on this principle for measuring flow velocity. Specifically, the flowmeter emits an ultrasonic signal and receives the echo signal reflected back by particles or bubbles in the fluid. When ultrasonic signals interact with particles or bubbles in the fluid, the frequency of the echo signal changes, and this frequency change is called Doppler shift. The measurement process of flow velocity is as follows: emit ultrasonic waves: the flowmeter probe emits a beam of ultrasonic signals obliquely upwards. Doppler shift: When ultrasound comes into contact with impurities or bubbles in a fluid, the reflected ultrasound produces a Doppler shift Δ f. This frequency shift is directly proportional to the fluid flow velocity. Calculate flow velocity: By measuring the Doppler frequency shift Δ f, the flow velocity V of the fluid can be calculated. Doppler ultrasonic flowmeter is particularly suitable for measuring fluids containing solid particles or bubbles, such as natural river channels, artificial rivers, agricultural channels, urban sewers, enterprise sewage outlets, and sewage treatment plants. In these environments, there are often sufficient impurities or bubbles in the fluid to allow the ultrasonic signal to effectively interact with it, resulting in a Doppler shift. In addition, the Doppler ultrasonic flowmeter also has the characteristics of high accuracy, non invasi

veness, and strong reliability. It does not require any measuring components to be installed in the fluid, so it will not interfere with fluid flow and will not affect measurement accuracy due to corrosion, wear, and other issues in the fluid. At the same time, the installation and maintenance of flow meters are relatively convenient and can adapt to various tedious on-site environments. In practical applications, there are various installation methods for Doppler ultrasonic flow meters: L-shaped installation method: suitable for large flow sites such as reservoir ecological flow monitoring and sewage monitoring, with the characteristic of sturdy texture. Penetrating installation method: suitable for situations such as water diversion channels in reservoirs. The side walls of the river are made of sturdy concrete and cannot be maintained without water supply. The bracket is made of stainless steel material and designed with a rotating slide rail, which can easily lift the sensor for maintenance. Base installation method: Suitable for farmland irrigation channels, timed drainage outlets, and other occasions, can be installed and maintained without water supply. A bottom made of stone or sturdy cement can be used for fixation, but it is not suitable for sites with weeds, stones, or other factors that may affect the measurement. Lifting and installation method: Suitable for sites with relatively small and slow water flow, such as farmland irrigation channels and reservoir diversion channels, where installation cannot be carried out. The bracket is easy to install and disassemble, but it is required that there should be no weeds hanging from the water collection system, and the bracket should not shake under the impact of la

1. Working principle of Doppler ultrasonic flowmeter

『SILVER Official Website SERVICE』