How to distinguish and judge heavy goods in international logistics transportation using a volumetric meter? |rotameter flow meter

Flow Meters – Silver Automation Instruments

『volumetric meter|rotameter flow meter』Related information(clamp on meter|electromagnetic meter|venturi meterrotameter|orifice meter|ultrasonic flow meter|mass flow meter|coriolis mass flow meter|coriolis flow meter|magnetic flow meter|magmeter flow meter|magflow flow meter|mag meter flow meter|electromagnetic flow meter|vortex flow meter|turbine flow meter|thermal mass flow meter|thermal flow meter|rotameter flow meter)

How to calculate the volume of soaked goods?

Question 1: How to calculate the volume of foam goods in logistics? Generally, it refers to a heavy cargo with a volume of about 4 cubic meters, which is measured as foam goods. Foam goods are also divided into heavy foam and light foam, and the volume is calculated as the product of the length, width, and height of the cargo. The measurement sheet is marked as CM. Generally, logistics companies calculate the foam weight ratio as 3:1, while shippers prefer to use 4:1 to calculate the foam weight ratio.. Question 2: What is volumetric weight, how to calculate it, and how to distinguish between heavy goods and soaked goods? What is volumetric weight? How to calculate? How to distinguish between heavy goods and soaked goods? Question: What is volumetric weight? How to calculate? How to distinguish between heavy goods and soaked goods?

1. Actual Weight: Actual Weight, which is the weight obtained based on weighing (weighing), including Gross Weight (G.W.) and Net Weight (N.W.).

. The most common is the actual gross weight. In air cargo transportation, the actual gross weight is often compared with the calculated volumetric weight, and the freight is calculated and charged whichever is larger.

2. Volumetric Weight: Volumetric Weight or Dimensions Weight, which is the weight calculated based on the volume of the goods using a certain conversion factor or calculation formula.

. In air cargo transportation, the conversion factor for calculating volumetric weight is generally 1:167, which means that one cubic meter is approximately equal to 167 kilograms. For example, if the actual gross weight of a shipment by air is 95 kilograms and the volume is volumetric meter|rotameter flow meter

1.2 cubic meters, calculated according to the factor of 1:167 for air transportation, the volumetric weight of this shipment is 1.2 * 167=200.4 kilograms, which is greater than the actual gross weight of 95 kilograms. Therefore, this cargo is considered as bubble cargo (also known as abandoned cargo, light cargo, or Light Cargo/Goods or Low Density Cargo or Measurement Cargo in English), and the airline will charge based on volumetric weight rather than actual gross weight. Please note that air freight is generally referred to as bubble cargo, while sea freight is generally referred to as light cargo, with different names. For example, if the actual gross weight of a shipment by air is 560 kilograms and the volume is 1.5 cubic meters, calculated according to the factor of 1:167 for air transportation, the volumetric weight of this shipment is 1.5 * 167=250.5 kilograms, which is less than the actual gross weight of 560 kilograms. Therefore, this cargo is classified as heavy cargo (English name Dead Weight Cargo or Heavy Cargo/Goods or High Density Cargo), and the airline will charge based on the actual gross weight, not the volumetric weight. In short, according to a certain conversion factor, calculate the volumetric weight, and then compare it with the actual weight. The larger one will be charged accordingly. 3. Chargeable Weight: English name Chargeable Weight, abbreviated as C.W., refers to the weight used to calculate shipping or other miscellaneous fees. The chargeable weight is either the actual gross weight or the volumetric weight. The chargeable weight is equal to the actual weight minus the volumetric weight, and the larger of the two is used to calculate the transportation cost.

4. Calculation method f

How to distinguish and judge heavy goods in international logistics transportation using a volumetric meter? |rotameter flow meter

How to calculate the volume of soaked goods?

『SILVER Official Website SERVICE』