Customized flowmeter | Which is a good vortex flowmeter?

『Customized flowmeter』Related information(clamp on meter|electromagnetic meter|venturi meterrotameter|orifice meter|ultrasonic flow meter|mass flow meter|coriolis mass flow meter|coriolis flow meter|magnetic flow meter|magmeter flow meter|magflow flow meter|mag meter flow meter|electromagnetic flow meter|vortex flow meter|turbine flow meter|thermal mass flow meter|thermal flow meter|rotameter flow meter)

1. Which electromagnetic flowmeter is accurate? Hello, KNKE, a manufacturer of electromagnetic flow meters imported from the United States, is pleased to answer your question. KNKE imported electromagnetic flow meters from the United States are currently recognized as good among imported brands such as ABB, Cologne, and E+H, followed by Siemens and Yokogawa. If you are more interested in electromagnetic flow meters, you can consider the KNKE brand electromagnetic flow meters from the United States, which have good quality assurance and after-sales service.

2. Technical specifications of glass rotor flowmeter

Glass rotor flowmeter ordinary type model nominal diameter mm working pressure MPa basic error limit% range measurement range Liquid gas LZB-2 φ 2 ≤ 1 ± 4 1:10 0.4-4 mL/min 6～60 mL/min 0.6～6 10～100 　　　　　　　　　　　　　　1～10 16～160 　　　　　　　　　　　　　 Ridge lead detection 1.6~16 25~250 LZB-3 φ 3 ≤ 1 ± 4 1:10 2.5~25 40~400 4~40 60~600 Wild Forest 6~60 100~1000 10~100 160~1600 LZB-4 φ 4 ≤ 1 ± 4 1:10 1~10 L/h 16～160 L/h 1.6～16 25～250 　　　　　　　　　　　　　　2.5～25 40～400 　　　　　　　　　　　　　　LZB-6 φ6 ≤1 ± 2.5 1:10 2.5-25 40-400 4-40 60-600 6-60 100-1000 LZB-10 φ 10 ≤ 1 ± 2.5 1:10 6-60 100-1000 10-100 160-1600 16-160 250-2500 LZB-15 φ 15 ≤ 0.6 ± 1.5 1:10 16-160 25-2500 400-4000 40-400 600-6000 LZB-25 φ 25 ≤ 0.6 ± 1.5 1:10 0.04-0.4 m3/h 1～10 m3/h 0.06～0.6 1.6～16 　　　　　　　　　　　　　　0.1～1 2.5～25 　　　　　　　　　　　　　　LZB-40 φ40 ≤0.6 ± 1.5 1:10-4~40 0.16~1.6 6~60 0.25~2.5-- LZB-50 diameter 50 ≤ 0.6 ± 1.5 1:10 0.4~4 10~100 0.6~6 16~160 1~10-- LZB-80 diameter 80 ≤ 0.4 ± 1.5 1:101: 5 1~10 50~500 1.6~16 80~400 7~30-- LZB-100 diameter 100 ≤ 0.4 ± 1.5 1:10 5-25 120-600 8-40 200-1000 12-60-- Note: The above specifications of fl

ow meters (DN2-10) are all side inlet and side outlet, connected by hoses or threads, and equipped with needle type flow regulating valves on the lower base. The liquid flow rate of the glass rotor flowmeter is calibrated with 20 ℃ clean water, and the gas flow rate is calibrated with 20 ℃ and 101325Pa air. According to user requirements, special flow meters can be made, with a maximum flow rate of 120m3/h for DN100 diameter and a maximum atmospheric flow rate of 3500m3/h. Special correction calibration can also be performed. Model nominal diameter mm working pressure MPa basic error limit% range measurement range Liquid gas LZB-15F φ 15 ≤ 0.6 ± 4 1:10 0.016-0.16 m3/h 0.25～2.5 m3/h 0.025～0.25 0.4～4 　　　　　　　　　　　　　　0.04～0.4 0.6～6 　　　　　　　　　　　　　　LZB-25F φ25 ≤0.6 ± 2.5 1:10 0.04~0.4 1~10 0.06~0.6 1.6~16 0.1~1 2.5~25 LZB-40F φ 40 ≤ 0.6 ± 2.5 1:10-- -- --0.16~1.6 4~40 0.25~2.5 6~60 LZB-50F φ 50 ≤ 0.6 ± 2.5 1:10-- -- --0.4~4 1~10 0.6~6 1.6~16 LZB-80F φ 80 ≤ 0.4 ± 2.5 1:101:5:5-10 50-250 1.6-16 80-400 LZB-100F φ 100 ≤ 0.4 ± 2.5 1:10:5-5 120-1600 8-40 200-1000 Note: Corrosion resistant types with nominal diameter ≤ 10mm need to be customized without needle type regulating valves. According to customer requirements, we can produce corrosion-resistant flow meters with a higher level of precision. The material model of the contact part between the flowmeter and the measured medium is the base and valve needle flange stop float guide rod sealing packing LZB-2LZB-3LZB-4LZB-6LZB-10 brass chrome plated - polytetrafluoroethylene (PTFE) agate or stainless steel (1Cr18Ni9Ti) - acid and alkali resistant rubber (IV-1) LZB-15LZB-25LZB-40- cast iron lining acid and alkali resistant rubber (IV-1) polytetrafluoroethylene (PTFE) stainles

Customized flowmeter | Which is a good vortex flowmeter?

2. Technical specifications of glass rotor flowmeter

『SILVER Official Website SERVICE』