What is the price of an electronic flowmeter?

『Flow meter password』Related information(clamp on meter|electromagnetic meter|venturi meterrotameter|orifice meter|ultrasonic flow meter|mass flow meter|coriolis mass flow meter|coriolis flow meter|magnetic flow meter|magmeter flow meter|magflow flow meter|mag meter flow meter|electromagnetic flow meter|vortex flow meter|turbine flow meter|thermal mass flow meter|thermal flow meter|rotameter flow meter)

1. Password for Promag 300 flowmeter

The default password for Promag 300 flowmeter is as follows

1. User level (first level) password. The default password is 0000, which is used to enter the regular parameter setting interface

2. The default password for regular parameter setting is 0010 (can also be simplified to enter 10). Operation process: Press the E key to enter the menu while in working mode. When prompted to enter the password, enter the source difference password, and then press E to confirm to enter the basic parameter settings. 3. Expert/Engineer level (Level 2) password default password is 4685, used to access advanced parameters and calibration functions. 4. Some models/advanced setting passwords may require password 0050 for more advanced parameters or quick settings. The operation steps are the same as the input method for regular parameter setting passwords. If the default passwords above cannot be used, it may be because the password has been changed. You need to contact the manufacturer or distributor for support. Please keep your password safe when using it to prevent unauthorized modification of parameters.

2. Password for Mike electromagnetic flowmeter

0521586418, etc. The password for the Mike electromagnetic flowmeter is divided into multiple levels, including first level password, second level password, third level password, and ordinary filial piety password. Among them, the first level password is 0521, which only has read permission; The second level password is 5864, which can change the regular password; The third level password is 19818, which can change passwords that users cannot change. The ordinary password is named 9194. If someone changes the pass

word, they can clear the password and parameters of the entire cleaning section by short circuiting the initialization jumper on the circuit board, but this method should be used with caution. Another method is to use the control panel to restore factory settings.

3. What is the price of an electronic flowmeter?

4. What is the password for the Dalian New Concept flowmeter?

The specific password for the Dalian New Concept flowmeter needs to be obtained by contacting the manufacturer or consulting the operation manual. Different models have hierarchical password permissions.. 1. The password grading rule refers to the use of graded password management in some pure flow meters. The Dalian New Concept flowmeter may be similar to the following common modes: • Level 2 password: The first level password is used to modify parameters 20-27 of the power number, and the second level password manages parameters 50-58 of the power number. Level 5 password: divided into user level (0-3 levels) and factory level (4 levels), for example, default level 0 password 0521 (view only), level 1 factory password 7206 (some parameters can be modified). two If the device is not marked with a password or the initial password is reset, it is recommended to: • check the parameter section of the randomly attached operation manual; • Call the manufacturers customer service phone number on the nameplate of Dalian New Concept Yi Ma Brother watch; Provide the device model serial number, which will be verified by the manufacturers engineer before sending the password. three The principle of parameter security operation is that non professionals should not attempt passwords at will, as misoperation may result in abnormal flow m