How much is an orifice flowmeter? What is the approximate price of a rotor flowmeter?

『How much is an orifice flowmeter』Related information(clamp on meter|electromagnetic meter|venturi meterrotameter|orifice meter|ultrasonic flow meter|mass flow meter|coriolis mass flow meter|coriolis flow meter|magnetic flow meter|magmeter flow meter|magflow flow meter|mag meter flow meter|electromagnetic flow meter|vortex flow meter|turbine flow meter|thermal mass flow meter|thermal flow meter|rotameter flow meter)

How much is an orifice flow meter, and how much is the DN200 orifice flow meter for Daquan Flow?

The cost of an orifice flowmeter depends on the measurement requirements on site, which are determined by the three parameters of the measuring medium, temperature, and pressure..

2. What is the approximate price of a rotor flowmeter?

3. Rosemount Meter Prices

The price of Rosemount meters varies greatly depending on the specific model and configuration, ranging from thousands to tens of thousands of yuan.. 1. Price List of Different Models Rosemount meters include various types, such as orifice flow meters, electromagnetic flow meters, vortex flow meters, etc., and their prices vary depending on accuracy, function, and purchase quantity. 2) Rosemount 3051SFC flowmeter: The price of the original American imported sock fuel model is about 9000 yuan. 3) Rosemount electromagnetic flowmeter: The basic model price is about 12000 yuan/unit, while the 8705 series flange sensor price can reach 12800 yuan; Some models have a unit price of approximately 29000 yuan per unit when ordered in bulk (≥ 1 unit). 4) Other models, such as ROSEMOONT8750WDMT1A1F, are priced at approximately 3999 yuan, Emerson 8705 electromagnetic flowmeter is priced at approximately 4999 yuan, and vortex flowmeter is priced at approximately 17998 yuan per piece. After understanding the differences in models, the price range is mainly influenced by the product type and configuration, and the selection should be based on specific application needs.

4. The reason for the slow decrease in flow rate of the orifice flowmeter is mainly related to five factors: blockage of the pressure tapping system, wear and deformation of the orifice plate, changes in process parameters, abnormal sales of pipeline working fluid, and improper maintenance of the instrument.

. Specifically, one issue is the blockage of the pressure sensing system. If there are impurities, crystals, or viscous substances in the medium, they will slowly deposit in the pressure sensing tube, causing the transmission of differential pressure signals to be obstructed and the flow display to decrease. For example, in a steam system, if a steam trap fails, condensed water freezes or impurities accumulate, the pressure sensing tube will be blocked; The pressure tapping hole is also easily blocked by particles, oil stains, or scaling in the medium, which makes it difficult to accurately transmit the actual differential pressure value to the transmitter, resulting in low flow display. The second issue is the wear and deformation of the orifice plate itself. Long term exposure to high-speed media can cause the aperture of the orifice plate to increase, especially at the edge of the throttle hole. According to the flow formula, changes in aperture will cause changes in the flow coefficient. When the actual flow rate remains constant, the displayed value will decrease; Under high temperature and high pressure conditions, the orifice plate may deform due to thermal stress or improper installation, such as exceeding the ellipticity limit, damaging the geometric shape of the throttling element, and causing distortion of the differential pressure signal. Thirdly, changes in process parameters, such as density, viscosity, temperature, or pressure of the medium deviating from the design values, can cause the flow coefficient and compressibility correction coefficient to deviate

『SILVER Official Website SERVICE』