Product
ProductCurrent position > Product detail

Unicom data billing

『Unicom data billing』Related information(clamp on meter|electromagnetic meter|venturi meterrotameter|orifice meter|ultrasonic flow meter|mass flow meter|coriolis mass flow meter|coriolis flow meter|magnetic flow meter|magmeter flow meter|magflow flow meter|mag meter flow meter|electromagnetic flow meter|vortex flow meter|turbine flow meter|thermal mass flow meter|thermal flow meter|rotameter flow meter)

1. How to charge for excess data of China Unicom?

The charging rules for excess data of China Unicom are as follows:

1. Basic billing rules: When the data exceeds the data included in the package, if the excess amount is less than 200M, it will be charged at a rate of 0.3 yuan/M.

2. Automatic data packet stacking rule: If the data exceeds 200M, the system will automatically stack a 1GB data packet worth 60 yuan for the user.

. At this point, the user needs to pay a fee of 60 yuan and can receive a 1GB data usage limit. After the 1GB data packet is used up, if it exceeds the limit again and the excess is less than 200M, it will still be charged at 0.3 yuan/M; If it exceeds or exceeds 200M again, the next 60 yuan 1GB data packet will be automatically added.

3. Fee cap and traffic restriction: After the cumulative traffic fee reaches 600 yuan in the current month, the system will no longer continue to charge, that is, the fee cap is 600 yuan.

. After the domestic traffic reaches 15G (or the total traffic reaches 40G) in the current month, the system will automatically shut down the users data network to prevent overuse. The data network will automatically resume operation the following month.

4. Precautions: Users should pay timely attention to blocking their own traffic usage during use to avoid incurring high fees.

. If the traffic exceeds the limit and leads to an increase in fees, users should ensure that their card balance is sufficient to avoid affecting normal use due to arrears or downtime.

2. How does China Unicom calculate excess data usage?

There are generally two ways for China Unicom to charge for excess data usage beyond the package: tiered billing:

Unicom data billing
for excess data usage beyond the package, the first 100MB will be charged at 0.27/MB.

. The range exceeding 100MB to 500MB will be charged at 0.15 yuan/MB. After exceeding 500MB, a fee of 0.03 yuan/MB will be charged. Charging based on fee threshold conversion: Any excess will be charged at 0.27/MB from the beginning. When the accumulated cost of Yanhui reaches 10 yuan, it will automatically convert to a billing unit of 10 yuan/100MB, meaning that there will be no additional charges for the subsequent 100MB. When the cumulative cost reaches 60 yuan, it will be automatically upgraded to a billing unit of 60 yuan/GB, and the excess will be calculated according to this standard in a cyclic manner. Other precautions: Fee cap: After the cumulative external data fee of the package reaches 600 yuan in the current month, domestic data will no longer be charged. Data usage restriction: The data network will automatically shut down when usage reaches 15GB and resume the following month. If the total data usage (including data within the package) reaches 40GB, the data network will be directly shut down for the current month and will only be restored the following month. Special package rules: Different packages may have different rules, such as Tencent King Card, ice cream package, 5G package, etc., which may have special regulations. Therefore, it is recommended that users consult the official customer service of China Unicom or inquire about specific package terms to obtain the most accurate information.

3. How to charge for excess data of China Unicom

The billing method for excess data of China Unicom varies depending on the package type and the users location.

. The following are several common billing si

『SILVER Official Website SERVICE』

Copyright2026SILVER E-Commerce
+86 15365082610