Characteristics of rotor flowmeter

『Characteristics of rotor flowmeter』Related information(clamp on meter|electromagnetic meter|venturi meterrotameter|orifice meter|ultrasonic flow meter|mass flow meter|coriolis mass flow meter|coriolis flow meter|magnetic flow meter|magmeter flow meter|magflow flow meter|mag meter flow meter|electromagnetic flow meter|vortex flow meter|turbine flow meter|thermal mass flow meter|thermal flow meter|rotameter flow meter)

The main differences between metal rotor flowmeter and metal float flowmeter are reflected in their characteristics, measurement principles, and applicable scenarios.

1. Different characteristics: Metal float flowmeter: very suitable for measuring small pipe diameters and low flow rates on site, with low requirements for straight pipe sections.

. Its structure is simple, maintenance is minimal, and the cost is relatively reasonable. Metal rotor flowmeter: It is more adaptable to complex and difficult to cope with on-site environments that ordinary instruments cannot handle, and is more suitable for measurement in the industrial field.

Secondly, the measurement principle is slightly different. Metal float flowmeter: Its principle is that in the vertical measuring tube of the flowmeter, when the fluid flows through, the float will float upward.

. At a certain position, the lift and gravity exerted on the float reach equilibrium. At this moment, the annular gap area is directly proportional to the rising height of the float, so the position of the float at a certain height represents the actual flow rate. Metal rotor flowmeter: Its working principle is that when the float floats up and down, the position is transmitted to an external indicator through magnetic coupling. This causes the pointer of the indicator to follow the movement of the float and linearly indicate the magnitude of the flow hole through the cam plate.

III. Applicable Scenarios Metal Float Flow Meter: Due to its simple structure, easy maintenance, and moderate cost, it is particularly suitable for working conditions with small pipe diameters and low flow rates, such as some small liquid or gas flow measurement systems.

. Metal rotor flowmeter: It is more adaptable to complex environments, such as various harsh working conditions in the industrial field, including high temperature, high pressure, corrosive media, etc. In these scenarios, metal rotor flow meters can provide more stable and accurate flow measurements. In summary, although both metal rotor flow meters and metal float flow meters belong to variable area flow meters, with similar working principles and similar appearances, there are certain differences in their characteristics, measurement principles, and applicable scenarios. Therefore, when making a choice, it is necessary to make a reasonable selection based on the actual working conditions and needs of the width.

2. What are the flow regulation methods for metering pumps?

3. What are the characteristics of remote transmission glass rotor flowmeter? The characteristics of the remote transmission glass rotor flowmeter mainly include the following: no moving parts, durable design: The remote transmission glass rotor flowmeter adopts a design without moving parts and pores, which makes the flowmeter wear free, dirt resistant, and does not require mechanical maintenance during use, greatly extending its service life. Micro power consumption technology, long-lasting endurance: This flow mode rolling meter adopts micro power consumption high-tech, which enables the battery powered on-site display flowmeter to operate continuously for more than two years. This feature not only reduces the frequency of battery replacement, but also improves the reliability and stability of the equipment. Integrated design, strong anti-interference ability: The temperature and voltage compensation of the remote transmission glass rot

『SILVER Official Website SERVICE』